Gypsum tiles have to be laid correctly, as not only the aesthetic look of cosmetic facing, but in addition the service life of the
substance will rely on the technology of job. The product is more universal, and it can be connected to plaster, concrete, brick
or gypsum board sheets, and provided that the surface of the foundation is even and has no flaws.
If the flaws of the base are significant, it should be completely treated with primer, then a cement mortar is made, which
satisfies all the cracks. Then the surface should be primed and dried. In cases like this, its composition should choose a
special, containing elements that prevent the appearance of fungus and mold.
In today’s interior of these rooms most often used gypsum tiles, imitating natural brick or stone. To execute decorative finishing
your self, it is necessary first of all to select a scheme of tile placement and prepare a remedy. It’s necessary to look closely
at the reverse side of this substance. When its surface includes an embossed surface, then the glue should be placed using an
trowel, also if it’s even, then with a notched one.
The tech of this work is as follows:
* A thin layer of glue is applied to the pre-prepared wall. It is distributed over the foundation so that it is possible to put
4-5 tiles. Decorative cladding can be placed both on plasterboard, also on putty.
* Glue the rear side of the tiles with glue.
* Plaster components are pressed against the wall and their location is adjusted. To align with the seams, it is advised to use
spacers.
* Finishing is carried out in rows, each of which ought to be changed by half a tile. Facing is completed into the corners of
this space, then immediately remove any remaining mortar at the joints.
Drying the walls takes no more than a day and needs a constant humidity and temperature within the room. The last point in the
placing of gypsum tiles is that their decoration. To get this done, the joints between the components are full of a particular
solution, the shade of which matches the brick.
Cosmetic fake of brickwork around the walls is carried out in the following ways:
* Cutting on the surface of the pits of masonry with a bolt cutter with your hands;
* laying of tiles beneath the brick:
* imitating the structure and color of the side of one brick;
* Imitating a fragment of brickwork of many bricks.
The perfect approach to decorate”under the brick” will be the one which enables you to make a masterfasada.ru functional coating with the most
look of its similarity to natural masonry. All 3 methods to conduct this sort of finishing functions meet the requirements,
however, the cutting of joints using a bolt is labor-intensive as well as the creation of considerable amounts of dust, and so
let’s consider more common ways.
The old finish is removed from the walls, and the surface, if necessary, is leveled to eliminate the requirement to glue plaster
on a thick layer of adhesive.
Combining these cladding with different kinds of interior finishes can be both systematic and done with no apparent consistency,
chaotically, together with fake of signs of aging.
With the help of cosmetic gypsum tiles it is possible to mimic a large number of textures.
A large number of textures could be imitated with the support of cosmetic gypsum tiles.
The wall where it is to be set up must have the following attributes:
* Hardness and durability of the surface;
* The absence of uneven places and sharp differences;
* not any deformations.
Cosmetic tiles in the interior of this kitchen
Walls are created from a number of materials, let us break down the individual rules of installment.
When dealing with concrete, there will not be any big problems. It is just necessary to take into consideration the porosity of
this material. Concrete, which has practically no pronounced pores, should be treated with a good primer.
Mounting gypsum tiles on concrete
Before beginning work on the installation of gypsum tiles on the walls, then it is well worth checking the strength of their
surface. After the plaster does not fall off the walls and at the same time holds nicely, it’s possible to simply paint it with
primer.
Mount the tiles on the painted concrete shouldn’t. The surface ought to be scratched, ensuring to misfire, then it ought to be
grouted and coated with a coating of plaster.