The depth of the material is 4 mm.
If you would like, you are able to boost the distance of the structure to 6 metres or more. To try it, it is sufficient to join a two-meter expansion. When selecting a drawing, then pay attention to the distance between the arches. This figure needs to be 65 cm, which is the most appropriate duration for the specified depth of the material. The width of the doorways in line with the producer’s drawing is 90 cm.
Before assembling a polycarbonate greenhouse, it’s important to choose a location because of its place. If that is done correctly, you can provide yourself with a crop of fresh vegetables for the whole year.
The location for your future greenhouse is marked immediately in the preparation of their garden plot. To be able to melt the snow in the place of the greenhouse as soon as possible, the very best point on the website is going to be a small elevation. Furthermore, in such a location won’t have to be concerned about significant humidity as dirt and atmosphere in the construction.
Assemble a polycarbonate greenhouse in an elevated site – intends to take care of the best temperature inside.
When it is not feasible to place a greenhouse in an elevated position, you will have to pour a coating of fine shattered rock about 20 cm and the identical layer of fertile soil to make seedbeds.
Before building a greenhouse in your garden plot, you should also consider where and how this structure is going to be installed. First, you have to select a place for this. The greenhouse should be located at a metropolitan region at least a few meters away from homes, barns and other structures.
The best way to Put in a greenhouse according to the Faces of the world
Make sure you level the dirt surface gidpostroy.ru – it’s ideal to even remove the surface. This will also get rid of weed seeds. And for simplicity of work, remove the soil in an area that’s around a meter wider on both sides of the rectangle you want.
Additionally, it is worth thinking about using a base. As manufacturers say, today most greenhouses don’t need it, particularly if they (greenhouses) are used only in the spring and summer period. However, seasoned anglers still recommend earning a basic foundation from a pub. It is extremely simple – it is sufficient to link with each other utilizing metal screws and corners four pieces of timber using a cross-section of 10 * 10 cm. The dimensions of such a foundation ought to be equivalent to the foundation of the upcoming greenhouse.
Simple bar foundation
You could even create a strip base of concrete. He’s more dependable than a bar foundation, but requires more financial and labor costs. Incidentally, the rainwater, that is used in winter, without it and do not do with it whatsoever.
Stages of the formation of a strip base: a schematic representation
Many producers counsel to set up greenhouse structures without even creating a base. Even for this use, they equip the framework with specific T-shaped legs, so the structure was securely fixed. But, as practice shows, it is still required to build a foundation: therefore and the basis will be more firmly fixed and also the elements of the basis that are in touch with the ground, will be saved much more in its initial state.
The major thing is to take care of the material with specific agents to protect the timber from moisture. The material is installed on concrete blocks that are dug into the ground. For a six-meter structure, they need 10 bits: four to each side and one at the center of the endings.
Before you perform the greenhouse itself, you will need to choose the right location for this. It has to be an even site, so the frame was found evenly, without distortions. It needs to be bright and not obscured by trees or buildings.